Trim & Baseboard Installation in Austin, TX
Hyde Park Craftsman homes and East Austin infills share the same trim failures — gapping inside corners, casings off-plumb, crown joints that opened up. Austin’s clay soils on the East Side and rocky Hill Country substrate both shift enough seasonally that coped inside corners outlast mitered joints by several renovation cycles.
- Coped corners — not mitered — standard
- Crown, casing, baseboard: one mobilization
- MDF and solid wood profiles available
Get Instant Quote
Professional Quotes for Central Texas
Austin — 78751 · 78702 · 78704
Trim & Baseboard Projects in Austin
| Baseboard and trim jobs in Austin run $4.50–$18.00 per linear foot depending on profile complexity and ceiling height. A straight 3.5" colonial MDF run in a Crestview ranch prices differently than compound crown through a Travis Heights two-story — scope is confirmed at the address, not estimated by zip code. |
Door Casing & Baseboard Reset
Post-foundation casing reset, Hyde Park bungalow
A 1924 bungalow a block from McCallum High had three doorways shifted ¼" off-plumb after pier foundation work the prior year. We reset all three casings, ran 180 LF of 3.5" colonial MDF baseboard through three bedrooms and the hallway, and set every nail hole before handoff to paint.
| Rooms | 3 bedrooms, hallway |
| Scope | 180 LF baseboard + 3 door casings |
| Duration | 2 days |
| Date | February 2026 |
| Products | MDF baseboard (MDF millwork), Pine casing (Pine millwork), 16-gauge finish nails (Bostitch), Paintable caulk (DAP Alex Flex), Crown molding (MDF / wood crown), Coping saw (Stanley / Olson), DeWalt 16-gauge finish nailer, Festool miter saw |
Board-and-Batten Accent Wall
Floor-to-ceiling board-and-batten, East Austin infill
New infill near Lady Bird Lake — owners wanted a floor-to-ceiling board-and-batten feature wall in the primary bedroom and fresh 3.5" colonial MDF baseboard throughout the open floor plan. 280 LF total. All 1x4 verticals fastened with construction adhesive and Bostitch finish nails; caulked and primed before paint.
| Rooms | Primary bedroom, living room, dining room |
| Scope | 280 LF baseboard + 1 accent wall |
| Duration | 3 days |
| Date | March 2026 |
| Products | MDF baseboard (MDF millwork), Pine casing (Pine millwork), 16-gauge finish nails (Bostitch), Paintable caulk (DAP Alex Flex), Crown molding (MDF / wood crown), Coping saw (Stanley / Olson), DeWalt 16-gauge finish nailer, Festool miter saw |
Full Crown & Baseboard Package
Compound crown through out-of-square rooms, South Lamar ranch
Mid-century ranch near Bowie High — walls measured 2–3° out of plumb throughout the main level. Every compound crown cut was calculated individually rather than averaged. We ran 420 LF of 3.5" baseboard and completed crown through the living, dining, and master suite. Zero ceiling-line gaps at final walkthrough.
| Rooms | Living, dining, master, 2 guest rooms |
| Scope | 420 LF baseboard + crown molding throughout |
| Duration | 4–5 days |
| Date | April 2026 |
| Products | MDF baseboard (MDF millwork), Pine casing (Pine millwork), 16-gauge finish nails (Bostitch), Paintable caulk (DAP Alex Flex), Crown molding (MDF / wood crown), Coping saw (Stanley / Olson), DeWalt 16-gauge finish nailer, Festool miter saw |
Our Services
Specialized Installation Services in Austin
Trim and baseboard work in Austin connects to every interior finish trade. These are the services most often combined with a baseboard or crown scope at Austin addresses.
Painting Services
After trim is set and nail holes are filled, Sherwin-Williams Emerald over ProMar 200 primer is the standard two-coat finish sequence for Hyde Park interiors. We coordinate trim and paint scheduling on the same project timeline so nothing waits on a second mobilization.
Door Installation
Running new baseboard through a hallway is the right moment to set or replace prehung interior doors. JELD-WEN units get shimmed plumb with a Milescraft hinge jig, foamed with Great Stuff, and cased before baseboard is run — so casing and base align in one pass.
Cabinet Installation
Kitchen and bath renovations that include new cabinetry almost always need crown molding tied to the cabinet top. We set Fabuwood and Schrock semi-custom boxes, then run and cope crown to the ceiling line in the same mobilization — no second trip.
Flooring Installation
Flooring installs before baseboard — that is the correct trade sequence. Once Lifeproof LVP or engineered hardwood is set, we scribe baseboard to the finished floor profile and nail it tight. Transitions and reducers are set at the same time.
Drywall Installation
Trim and drywall share a prep sequence. We hang USG Sheetrock, tape with FibaTape, apply three coats of USG All Purpose joint compound, sand with the Festool system, and hand off wall-ready surfaces for baseboard and casing installation.
Common Questions
FAQs About Austin Trim & Baseboard Installation
What trim profile fits 1920s Hyde Park Craftsman homes?
Why cope inside corners instead of miter in Austin?
How does ceiling height affect crown molding cost?
Can trim and flooring be scheduled in the same week?
What is the minimum project size for baseboard installation?
Why Homeowners Choose HandyMan Install
Every project gets a written scope confirming service, materials, labor rate, and timeline before work starts. Signed before mobilization.
We understand construction order. Drywall before paint. Flooring before baseboard. Cabinets before countertop template. Every trade goes in sequence.
We focus on full installation scopes, not single-item repairs. This keeps our scheduling consistent and quality high on every project we take.
Your Trim Punch List Has a One-Visit Fix
Call 512-290-5153 to scope it at the address. Hyde Park to South Lamar, a coped corner does not take long — it just takes the right setup. Clear the list and get your Saturday back at the Hike-and-Bike Trail instead of waiting on a second contractor visit.
Austin Homeowner Resources
Painting Services · Door Installation · Cabinet Installation