Drywall Installation in Spring, TX
Neighbors from Ponderosa Forest to Gleannloch Farms usually call us after water has already been at the baseboard. We replace whole walls and ceilings to the full plane, never patches, and match the texture you already live with.
- Whole wall planes
- Texture matched room to room.
- Klein to Old Town Spring.
Get Instant Quote
Professional Quotes for Houston & Central Texas
What can we help you with?
Pick one or more. No contact details needed yet.
Quick Overview
Spring Drywall, the Short Version
- What we take on: Full wall and ceiling replacement, new walls and additions. Small patch work is not our scope.
- Installed price: $2-$6 per square foot hung, taped and finished.
- Texture and skim coat: Texture adds $0.80-$2.00 per square foot; a skim coat toward Level 5 runs $1.00-$1.30.
- Smallest job: Projects start at $500.
- Permit question: Spring has no city hall, and non-fire-rated gypsum is exempt finish work either way.
- Reach the crew: Call 512-290-5153 and we will come read the wall.
Direct Answers
Three Things Spring Neighbors Ask Us
Budget $2 to $6 per square foot for board hung, taped and finished, then add texture or a skim coat as its own square-foot line.
Board and insulation that held moisture past about 48 hours come out to the full wall plane, because the paper face and core do not recover.
No, our crews handle full wall and ceiling replacement at a $500 project minimum, so one hole is better suited to another contractor.
Why Spring Is Different
Why Spring Board Fails From the Bottom Up
Ask around Westador or Champion Forest and the drywall story here is almost never a ceiling story. It starts at the floor line, and it starts outside the house. Here is what neighbors are really describing when they call.
Water arrives at the slab line
When Cypress Creek or Spring Creek goes over its banks, the water does not come through the roof. It arrives at the slab line and climbs. More than 8,700 homes along Cypress Creek took water during Harvey and about 1,700 in the 2016 Tax Day flood, with Ponderosa Forest, Westador and Champion Forest carrying much of that. Gypsum wicks, so the paper face and core across the lowest two feet go soft, bottom plates stay damp, and the insulation behind the board holds the moisture in place. That is a full-plane replacement.
The sand drains, the clay underneath does not
Your yard probably drains beautifully in the first hour, and that is the loamy fine sand at the surface here doing its job. Underneath sits a subsoil running 20 to 34 percent clay, and once water reaches that horizon it stops and perches. So soil stays saturated against the foundation and the base of the wall stays damp long after the neighborhood looks dry again. Board that held moisture past roughly 48 hours will not come back, which is exactly why we cut to the framing and start from clean, dry material.
Cracks read differently here than south of us
Spring sits on Lissie Formation uplands, sandier and better drained than the Beaumont clay carrying south Houston. That matters when you are standing there looking at a crack. Seasonal shrink-swell is gentler at these addresses, so a wide diagonal crack fanning out of a door corner in Klein or Memorial Northwest usually points to something local rather than citywide: one perched wet spot at a slab edge, a planting bed graded back toward the house, or an old flood cut-out that nobody finished properly. We go looking for that cause first.
Spring: 77373 · 77379 · 77386 · 77388 · 77389
Typical Drywall Installation Scopes in Spring
Most Spring work lands between $2 and $6 per square foot hung, taped and finished. Texture adds $0.80-$2.00 and a skim coat $1.00-$1.30 per square foot. Ceiling height, finish level, access and how much demolition comes first decide where you sit.
Ceiling Replacement
One continuous plane, no seams left showing
Old board down, framing checked while it is open, new USG Sheetrock hung off a laser reference so the long run stays flat, then taped, coated and textured to match the adjoining rooms.
| Rooms | Kitchen and breakfast ceiling |
| Duration | 3 days |
| Lead time | About a week out |
| Products | USG Sheetrock, joint compound, paper tape, corner bead, drywall stilts |
Lower Wall Plane Replacement
After water has been at the baseboard
Affected wall planes removed in full, bottom plates and studs read with a meter until they are dry, insulation replaced, then new board hung, finished and textured so the repair disappears into the room.
| Rooms | Den, hall and two bedrooms |
| Duration | 5 days |
| Lead time | 1 to 2 weeks out |
| Products | USG Sheetrock, R-13 batt insulation, moisture meter, joint compound, paper tape |
Addition and Garage Conversion Hang
New framing, finished to match the house
New walls and ceiling hung, taped and finished to Level 4, with corner bead at every outside angle and the existing texture matched so the new room reads as original.
| Rooms | Two rooms plus ceiling |
| Duration | 4 days |
| Lead time | About 2 weeks out |
| Products | USG Sheetrock, corner bead, drywall screws, joint compound, Festool sander |
Site Conditions
What We Find Behind Spring Walls
Houses tell on themselves the moment the trim comes off. These are the conditions that show up most often around Spring, and what each one actually calls for.
| Condition | Where you see it in Spring | What it needs |
|---|---|---|
| Soft board across the lowest two feet | Cypress Creek and Spring Creek corridor homes | Full wall-plane replacement with bottom plates and studs metered dry before new board goes up. |
| Wet insulation behind dry-looking board | Ponderosa Forest, Westador, Champion Forest | Cavity opened and insulation replaced, because batts hold moisture against framing long after the surface feels dry. |
| Diagonal cracking at one door corner only | Klein, Memorial Northwest, Northampton | Local cause traced first, usually a perched wet spot or a bed graded toward the slab, then the plane replaced. |
| Old flood cut-out finished at the wrong height | 1970s-80s stock throughout the creek corridors | Previous repair removed back to framing so the new plane lands flat instead of carrying forward a step. |
| Ceiling stain under the attic air handler | Any 1990s-2010s two-storey plan | Source confirmed as condensate rather than creek water, then the affected ceiling plane replaced and retextured. |
| Long ceiling spans in taller plans | Gleannloch Farms, Windrose, Auburn Lakes, Harmony | Laser reference and stilts across the whole run, since a flat ceiling at twelve feet shows every deviation under raking light. |
Materials
On the Truck for a Spring Hang
USG Sheetrock goes up with drywall screws, then joint compound, paper tape and corner bead build the finish before it is sanded with screens or a dust-extracting sander. A screw gun, laser level, taping knives and stilts keep long Spring ceiling runs true, and a moisture meter decides where the cut line goes.
| Product | Brand | Why it earns the spot |
|---|---|---|
| Bosch 360° laser level | Bosch | Used for alignment and ceiling/wall reference lines. |
| DeWalt 20V MAX Drywall Screwgun | DeWalt | Speeds drywall fastening and improves consistency. |
| FibaTape or paper drywall tape | FibaTape / USG | Paper tape for seams; mesh tape for specific conditions. |
| Grip-Rite drywall screws | Grip-Rite | Used to secure drywall to framing. |
| Marshalltown taping knife set | Marshalltown | Used for mud application and smoothing. |
| USG All Purpose Joint Compound | USG | Used for seams, corners, and final finish. |
| USG Sheetrock 1/2 in. drywall | USG | Standard interior wall and ceiling panels. |
| Festool drywall sander | Festool | Improves finish quality and dust control. |
Material grades are specified per substrate after the on-site walkthrough. Material prices are carried in the project scope.
Pricing
Spring Drywall Pricing
Two variables decide a drywall number: how many square feet, then which finish level. The ranges below hold across the metro, Spring included.
| Scope | Typical Spring range | What drives the spread |
|---|---|---|
| Board hung, taped and finished | $2-$6 per sq ft | Board thickness, finish level, ceiling height and how the room is accessed |
| Texture, orange peel or knockdown | $0.80-$2.00 per sq ft | How tight the match has to be and how far it must blend into adjoining rooms |
| Skim coat to a Level 5 finish | $1.00-$1.30 per sq ft | Window light raking across the wall, final sheen and total area skimmed |
| Full-plane replacement after water | Quoted after walkthrough | How far up the wall moisture travelled, insulation volume and drying time before board goes up |
| Project minimum | $500 | The smallest scope we take, since patch-only calls are not the work we do |
Minimum project size is $500. Every figure is confirmed on site before work starts.
Process
How a Spring Install Runs
- 1A phone call first. Tell us the rooms, the ceiling height and whether water has been in the house. That usually gets you a working range before anyone drives out.
- 2On-site measure and moisture read. We measure square footage and meter the framing and plates, which is what decides how far up the wall the cut line lands.
- 3Protection and demolition. Floors and openings get covered, trim comes off carefully so it can go back, and old board and wet insulation leave the site.
- 4Board goes up and gets screwed off. New USG Sheetrock goes up against a laser reference, so ceilings and long walls stay flat instead of following the old framing.
- 5Tape, coat and sand. Paper tape and three compound coats build the joints, corner bead goes on every outside angle, and sanding is done with dust extraction.
- 6Texture match and final walk. Orange peel or knockdown is matched to the rest of your house, then we walk it with you under your own lighting.
Coverage
Spring Neighborhoods We Work In
Our crews run Old Town Spring and the I-45 corridor, west through Klein, and north past the Grand Parkway on a normal week. A street near any of these is already on the route.
Our Services
Specialized Services in Spring
Take the trim off a Spring room and drywall turns out to be one item of three or four. The crews for the rest work the same streets on the same calendar.
Painting Services
New board wants primer and two coats, and the lowest band of wall needs a moisture read before any of it. Same crew, same week, no coordinating between trades.
Flooring Installation
If board came out at the slab line, the floor adhesive at that perimeter usually went with it. We measure slab moisture before anything new goes down.
Tile Installation
Backer board and waterproofing belong in the same sequence as the drywall. Showers get flood tested before a single tile is set.
Handyman Services
Doors, trim and hardware around a replaced wall all need resetting, and that is a multi-item visit rather than a drywall line. Minimum project is $500.
Fence Installation
Once the inside is done, the fence is usually next on the list. New runs and full replacements only, with footings set into the clay below the sand.
Common Questions
Questions Spring Neighbors Ask
Would you patch a single hole for us?
We do not, and we would rather say so up front. Our crews do full wall and ceiling replacement with a $500 project minimum, so a single hole belongs with a smaller outfit.
What is new drywall costing per square foot in Spring?
Between $2 and $6 per square foot hung, taped and finished. Texture adds $0.80-$2.00 and a skim coat toward Level 5 adds $1.00-$1.30 per square foot on top of that.
Do I need a permit for drywall in Spring?
Spring is unincorporated, so there is no city building office in the loop, and non-fire-rated gypsum sits on the exempt side of trigger-based permitting regardless. Fixture work in other trades is different.
How high up does the board have to come out?
We meter it rather than guess. Board and insulation that stayed wet past about 48 hours come out to the full wall plane, because the core and paper face never regain strength.
Why did my cracks come back in one spot?
A crack that reopens at the same corner is usually tied to a local wet spot at that slab edge rather than seasonal movement. We look for the drainage cause before rehanging board.
Will the knockdown match my other rooms?
Yes, and we blend it into the surrounding surface rather than stopping at the new board. Orange peel, knockdown and hand-trowel finishes all get matched before the final walkthrough.
Which drywall finish level should we choose?
Level 4 suits most Spring homes with texture over it. Choose Level 5 for smooth walls, satin sheens, or any long wall that catches raking light from a window.
Can you do our ceilings while we stay home?
Usually yes. We work room by room, seal openings, sand with dust extraction and clean daily, so the household keeps the rest of the house while the crew is on site.
How We Work
We meter before we cut
The moisture reading in the plates and studs sets the cut line. That is what keeps a repair from reopening in a year.
Demolition through texture, one crew
The same people who tear out the wall hang, finish and texture it. Nothing gets handed off halfway and nothing waits on another trade.
Dust controlled, floors covered
Openings are sealed, floors stay protected and sanding runs through dust extraction. The site gets cleaned at the end of every day.
Texture matched, then walked with you
We blend into the surrounding surface and then walk the room under your own lighting, correcting anything you flag before we load up.
Let's Get Those Walls Flat Again
Most of our Spring walkthroughs happen early enough to leave your Saturday for the Old Town Spring shops or Theiss Farms Market. Reach us at 512-290-5153 and we will come read the wall.
Our Spring Homeowner Resources
Handyman Services · Fence Installation · Flooring Installation · Painting Services · Tile Installation